Energy Saver Pond Pump 2250-4500 for Standard Ponds

Energy saving pond pump for filters and waterfalls. Powerful, yet economical this low maintenance design pond pump is adjustable to suit any pond and season. Suitable for waterfalls and filters, the Energy Saver Pond Pump combines low maintenance with high performance, and using its digital motor technology consumes around thirty percent less energy that similarly priced pumps.

  • Motor Protection System – If the pump detects the motor is clogged or jammed the motor protection system will pause and display, motor jammed, clean impeller, clean rotor. When the clogging has been removed the pump can safely restart.
  • Run Dry Protection System – If the pump detects is has run out of water, it will pause and display, water low, add water. When water has been added the pump with safely restart.
  • Flexible Power Usage Control & Display – With the touch of a button the user can stop, start, increase or decrease power and flow, thereby allowing for optimum performance and maximum energy saving.
  • Soft Start – When the pump is turned on the flow will slowly increase to its pre-set position. This helps to reduce the wear on the pump whilst decreasing stress to the pipework and filters fitted to the system.
  • The Energy Saver Pond Pump can be placed anyway up whilst in the pond, its casing has equally distributed holes all the way around which ensures an even flow of water to the pump so should debris create a partial blockage the pump will continue to work. The impeller also has clear housing making it easy to check for possible blockages or damage without having to undo it. With a three year guarantee the Energy Saver Pond Pump pack contains a pump, controller, hose tails and a complete set of fittings.

  • Energy Saver Pond pump
  • Controller
  • Hosetails and fittings
  • Product code 8837
    Product barcode 755349088379
    Disposal of electrical goods Y
    Wattage 15W to 25W Variable

    CAUTION: Household indoor and outdoor use.
    WARNING: To reduce the risk of electric shock, connect only to a properly grounded, grounding-type receptacle. To reduce the risk of electric shock, install only on a circuit protected by a ground fault circuit interrupter (GFCI).
    DANGER: Ultra Violet Radiation. Do not expose eyes to lamp rays. Disconnect power before servicing or replacing the lamp. READ THE INSTRUCTIONS.

    IP Rating IPX8
    Weight 1.7kg
    Max pumping height 3m (910")
    Voltage 230V
    Scroll to Top